Expected delivery is approximately 3 weeks from the date of order. Delivery times may vary slightly depending on your location.

PREempt™ CS20 Sterilant & High-Level Disinfectant

Professional High-Level Disinfection in Just 20 Minutes

PREempt™ CS20 is a Health Canada registered sterilant and high-level disinfectant designed for professional salon, spa, podiatry, and medical instruments. Powered by Accelerated Hydrogen Peroxide® (AHP®) technology, it delivers rapid, effective sterilization while remaining environmentally friendly and easy to use.

Key Features

• ✔ Sterilizes professional tools in just 20 minutes

• ✔ Ready to use – no mixing or dilution required

• ✔ Reusable in a soaking tray for up to 14 days

• ✔ Odourless and VOC-free

• ✔ Biodegradable and environmentally friendly

• ✔ No special ventilation required

• ✔ Leaves no toxic residue

• ✔ Powered by Accelerated Hydrogen Peroxide®

Suitable for professional stainless steel and hard plastic tools including:
Nail clippers, scissors, reusable foot files, cuticle pushers, tweezers, microblade handles, needle holders, and similar professional implements.

Note:
Do not use on soft metals such as nickel, brass, copper, carbon-tipped devices, or anodized aluminum.

Uses & Benefits

PREempt™ CS20 provides both sterilization and high-level disinfection in a single ready-to-use formula.

Its fast 20-minute contact time and extended 14-day reuse period make it an ideal solution for salons, spas, podiatry clinics, esthetics practices, and professional nail services.

The formula requires no dilution, reducing preparation time while ensuring consistent performance.

High-Level Disinfection

High-level disinfection is recommended for semi-critical instruments that contact:

• Mucous membranes

• Non-intact skin

but do not penetrate sterile tissue or enter normally sterile body areas.

Typical applications include:

• Reusable foot files

• Nail clippers

• Cuticle pushers

• Tweezers for ingrown hairs

• Microblade handles

• Needle holders

Health Canada Approved Reuse Period

Health Canada approves PREempt™ CS20 for reuse up to 14 days, provided:

• The solution remains visually clean

• A 2% AHP Test Strip indicates a passing concentration

Replace the solution immediately if:

• The solution becomes visibly contaminated

• The test strip indicates failure

even if the 14-day period has not elapsed.

Directions for Use

Before Use

• Verify that instruments are compatible with PREempt™ CS20.

• Pre-clean, rinse, and dry all instruments thoroughly before immersion.

Compatible Materials

• Stainless steel

• Hard plastics

• Acrylic

• Silicone rubber

• High-density plastics

Not Compatible

• Copper

• Brass

• Nickel

• Carbon-tipped devices

• Anodized aluminum

High-Level Disinfection

1. Pre-clean, rinse, and dry instruments.

2. Completely immerse in undiluted PREempt™ CS20.

3. Soak for at least 20 minutes.

4. Remove and rinse with sterile or potable tap water.

Sterilization

1. Pre-clean, rinse, and dry instruments.

2. Immerse completely in undiluted PREempt™ CS20.

3. Allow required sterilization contact time.

4. Remove and rinse thoroughly with sterile water.

Important

• Do NOT dilute the solution.

• Do NOT soak instruments overnight.

Reuse Guidelines

PREempt™ CS20 may be reused for up to 14 days, provided:

• A 2% AHP Test Strip confirms acceptable concentration.

• The solution remains clean and uncontaminated.

Always discard the solution if it becomes visibly soiled or fails the test strip, regardless of the remaining reuse period.

Available Sizes

• 1 Litre

• 3.78 Litres (1 Gallon)

• 12 Litres

• 15.12 Litres (4 Gallons)

Active Ingredient

Hydrogen Peroxide – 7%

Safety Information

• Keep out of reach of children.

• May cause burns.

• Avoid contact with eyes and skin.

• Wear appropriate protective gloves and clothing.

• Store in a cool, dry, well-ventilated area.

• Keep away from direct sunlight, heat sources, chemicals, and open flames.

• Read and follow all product label instructions before use.

Please Note

For complete precautionary statements, sterilization procedures, and required contact times, always refer to the official product label provided by the manufacturer.